Aquabrass Xpress Square Rounded Thermostatic Shower Trim Kit 3-way Shared - XPSK02

Aquabrass Xpress Square Rounded Thermostatic Shower Trim Kit 3-way Shared - XPSK02

This 3-way shared thermostatic shower trim kit includes a square rainhead, handshower and rail with a tub spout. One 90801 thermostatic valve is required separately.

Features

• Square solid metal trim set with a separate temperature-control handle.
• Two sets of handles included.
• Fluehs German-made ceramic 3-way shared diverter cartridge ABCA-TH-300 included.
• Shared diversion provides individual outlet selection and shared outlet positions.
• 15" round wall-mounted shower arm with square flange and 1/2" NPT male connection.
• Alternative 4" solid-brass ceiling arm with square flange and 1/2" NPT male connection included.
• 10" square stainless-steel rainhead with contemporary styling, easy-clean silicone spray nozzles and 1/2" female connection.
• Square three-function handshower; rain and rain-mist modes are confirmed.
• Stainless-steel rail with adjustable metal sliding hook and square flanges.
• Double-interlock 5 ft spiral hose with anti-twist ball-bearing end and 1/2" connections.
• Solid-brass square waterway with adjustable flange and 1/2" NPT female connection.
• Rainhead flow rate: 1.8 gpm. Handshower flow rate: 1.8 gpm.
• Temperature limit can be adjusted; the kit installation guide specifies a factory maximum setting of 120°F (49°C).
• 90801 Xpress thermostatic valve is not included and must be purchased separately.
• Rounded square solid-brass tub spout with clear water flow and 1/2" slip-fit inlet.

Specifications

• Room: Bathroom
• Product type: Thermostatic shower trim kit
• Model: XPSK02
• Outlet control: 3-way shared
• Included diverter cartridge: ABCA-TH-300
• Rainhead / handshower flow: 1.8 gpm each.
• Trim plate: 5 1/8" (130 mm) wide × 7 7/8" (200 mm) high.
• Trim control centres: 3 15/16" (100 mm); plate thickness: 1/8" (3 mm).
• Rainhead: 10" × 10" (250 × 250 mm), height 2 1/4" (57 mm).
• Wall arm: nominal 15"; overall drawing length 14 9/16" (371 mm).
• Ceiling arm: 4" (102 mm); choose either the included wall arm or the included ceiling arm for the rainhead.
• Rail length: 27 9/16" (700 mm); mounting centres: 23 3/4" (603 mm).
• Handshower: 9 15/16" (252 mm) long × 3 3/16" (80 mm) wide × 2 3/16" (55 mm) deep.
• Hose length: 5 ft.
• Waterway flange: 2" × 2" (50 × 50 mm).
• Required 90801 valve installation depth: 3"–4", measured from backing to finished wall as shown in its installation guide.
• Tub spout 56N32: overall projection 7 5/8" (194 mm), outlet reach 5 7/8" (148 mm), flange 3 1/4" × 2 3/16" (82 × 56 mm).
• Tub spout installs on 1/2" copper pipe with a recommended minimum projection of 1 1/2" (38 mm), following the installation guide.

Included Components

• Square trim set and two sets of handles.
• ABCA-TH-300 diverter cartridge.
• XPS62 wall arm and flange.
• XPS64 ceiling arm and flange (alternative installation option).
• XP184 square rainhead.
• XPS85 square handshower.
• XPS86 rail with adjustable sliding hook.
• 18090 anti-twist hose.
• XP511 square waterway.
• 56N32 rounded square tub spout.

Required for Installation

• One Xpress thermostatic valve 90801 — SKU ABGRP90801 — sold separately. The kit already includes the model-specific diverter cartridge.
• One 1/2" NPT extension fitting for the waterway is not included. The manufacturer specifies this standard fitting without a proprietary part code; it is needed in addition to the valve.

Certifications

• Manufacturer specification sheets list ASME A112.18.1 and CSA B125.1 compliance for the applicable plumbing components.
• The rainhead and handshower specification sheets list EPA WaterSense certification.

Shop the Aquabrass Xpress Square Rounded Thermostatic Shower Trim Kit 3-way Shared - XPSK02 at e-unoia.com