Collection: Cabinet Hardware

0 products

No products found
Use fewer filters or remove all

About this collection

Cabinet Hardware

Drawer pulls, bin pulls and knobs from the same makers as the faucets — designed in the same collections, cast in the same finishes, so the handle on the vanity drawer matches the tap above it. This is the detail that decides whether a room looks specified or assembled.

Why buy the hardware with the faucet

Finish is the reason. A brushed gold from one manufacturer is not the brushed gold of another — the plating chemistry differs, and the mismatch is obvious once two pieces share a sightline. Buying the pull from the brand that made the faucet is the only reliable way to get them to agree.

It also means the design language carries through: the knurling on a Brizo Litze pull is the knurling on the Litze faucet handle.

Pull, bin pull or knob
  • Knobs take one screw and suit small doors and narrow drawers. Easiest to retrofit — a single hole.
  • Drawer pulls take two screws at a fixed centre-to-centre spacing. Measure the existing hole spacing before you order; if it does not match, the drawer front needs new holes.
  • Bin pulls are the cup-shaped ones, open at the bottom. Traditional in feel, and they suit a drawer you pull from above.
Before you order
  • Count them. A vanity or a kitchen run needs more than people expect. Order the whole set at once — finishes are batched, and a later order can differ slightly.
  • Centre-to-centre. For pulls, measure hole centre to hole centre, not overall length.
  • Screw length. Thicker drawer fronts, including anything with an applied panel, may need longer screws than the ones supplied.
Buying from Eunoia

Authorized dealer for every brand we carry, with the full manufacturer warranty. Over 3,000 of our products ship free anywhere in Canada; everything ships free within Ontario, and any order over $3,000 ships free Canada-wide.

Specifying a whole kitchen or bathroom? Send us the faucet model and the number of pulls and knobs you need and we will confirm the matching finish codes before you order.

Also see: Kitchen Accessories · Bath Accessories · Kitchen Faucets · Bathroom Sink Faucets · Brizo

Frequently asked questions

Will the finish match my faucet exactly?
If the pull and the faucet are the same brand and the same finish code, yes. Across brands, no — plating is formulated per manufacturer, and two pieces that share a sightline should share a brand.

How do I measure for a drawer pull?
Centre of one mounting hole to centre of the other. That figure, not the overall length of the pull, is what has to match your existing holes.

What is a bin pull?
A cup-shaped handle, open underneath, that you hook your fingers into from below. It mounts with two screws like a standard pull.

Are screws included?
Yes, standard-length screws come with the hardware. Thicker drawer fronts may need longer ones, which are a hardware-store item.

Can I order a single piece to replace a damaged one?
Yes, but check the finish against the rest of the run first. Call us with the model number and we will confirm what is current.